CSI 22 11 00 / 33 11 00 — Facility & Utility Water Piping
ASTM A53 Grade B mill test report checklist
Standard Specification for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and Seamless
Chemistry (% by weight)
- Carbon (C)
- ≤ 0.3%
- Manganese (Mn)
- ≤ 1.2%
- Phosphorus (P)
- ≤ 0.05%
- Sulfur (S)
- ≤ 0.045%
- Copper (Cu)
- ≤ 0.4%
- Nickel (Ni)
- ≤ 0.4%
- Chromium (Cr)
- ≤ 0.4%
- Molybdenum (Mo)
- ≤ 0.15%
- Vanadium (V)
- ≤ 0.08%
Tensile requirements
- Yield strength
- ≥ 35 ksi
- Tensile strength
- ≥ 60 ksi
- Elongation in 2 in.
- ≥ 29.5%
Build America, Buy America
2 CFR 184.3On federally funded infrastructure, ASTM A53 Grade B material is an iron or steel product: every process from initial melting through coating must happen in the United States. The mill test report should show a U.S. melt and pour location for each heat.
Edition, notes and sources
Checked against A53/A53M-24 (Types S and E)- Minimum elongation in 2 in. is e = 625,000·A^0.2 / U^0.9 (A = specimen area, capped at 0.75 in²; U = 60,000 psi). 29.5% is the value at A = 0.75 in²; smaller specimens require less, so a shortfall is flagged for review, not failed.
- The five elements Cu, Ni, Cr, Mo and V combined may not exceed 1.00%.
Sources
ASTM standards are copyrighted. These limits were cross-checked against published summaries; confirm them against a licensed copy of the edition your specification cites.
Reviewing an ASTM A53 Grade B mill test report
- Confirm the MTR names ASTM A53 Grade B (or a dual certification that includes it).
- Match the heat number on the MTR to the heat stamped on each delivered piece.
- Compare the heat analysis with the chemistry limits above.
- Compare the tensile results with the yield, tensile and elongation minimums.
- On BABA work, confirm the country of melt and pour is the United States.