Free tool
Mill test report validator
Upload one mill cert. Its chemistry, tensile results, carbon equivalent and country of melt are checked against the ASTM grade and 2 CFR 184, and every result shows the value read and the limit it was checked against.
No cert to hand? Try a sample
What this checks on a mill test report
A mill test report (MTR, also called a mill certificate or CMTR) records the chemistry and mechanical test results for one heat of steel. Reviewers compare it with the grade named in the specification and, on federally funded work, with the Build America, Buy America requirement that iron and steel be melted and poured in the United States.
- Chemistry: carbon, manganese, phosphorus, sulfur and silicon (plus alloys where the grade limits them) against the grade's maximums.
- Tensile properties: yield, tensile strength, yield-to-tensile ratio and elongation.
- Carbon equivalent: the IIW formula used in AWS D1.1, CE = C + Mn/6 + (Cr + Mo + V)/5 + (Ni + Cu)/15.
- Origin: country of melt and pour, for 2 CFR 184.3 iron and steel products.
- Traceability: a heat number and an EN 10204 3.1 or 3.2 inspection certificate.
Grades supported
ASTM A992, ASTM A36, ASTM A615 Grade 60, ASTM A53 Grade B, ASTM A500 Grade C, ASTM A312 TP316L. Each grade page lists the exact limits the checker uses.