Skip to content
SubmittalForge

Free tools and references

Generate a BABA certification letter

Draft a certification letter from a submittal's mill certs in the app, or fill one in by hand with the free tool, then check eligibility and export it.

From a submittal in the app

If your company fabricated or supplied the product, draft the letter from the submittal's documents so the heat numbers match the certs.

  1. Open the project, pick the submittal and click BABA letter.
  2. Check the values filled in for you.Project, contract, agency and funds obligated come from the project; submittal number, title and CSI section from the submittal; heat numbers and mills from its mill test reports and bill of lading. Melted and poured in the U.S. is ticked only if every cert says so.
  3. Enter your U.S. plant and the Authorized officer and Title of the person who will sign.
  4. Tick Every later process, through coating, happened in the U.S. only if that's true.It's never ticked for you; the letter can't be exported or attached until it's answered.
  5. Click Attach to submittal, then Print / save PDF.
  6. Have the officer sign the printed letter. Then open the submittal's Documents → BABA letter tab, tick Signed by an authorized representative and click Save.Until then the cross-check reports the letter as unsigned. Keep the signed copy with the submittal.

With the free tool

  1. Open the BABA certification letter generator. It starts empty.Signed in as a fabricator or subcontractor, your company name is filled in. To see a completed letter first, click See a filled-in example; it's marked as sample data until you click Clear example.
  2. To fill in the steel details from a mill cert, click Start from a mill cert (or Fill these in from a mill cert under Product) and choose the cert.It's read twice, like the free MTR validator, and counts toward the same free allowance. The heat number, mill and mill location are filled in only where both readings agree, and Melted and poured in the U.S. is ticked only if every cert says so. Anything the readings disagree on is listed for you to type in. Click Add another mill cert for each further heat. The coating statement is never answered from a cert: tick it yourself if it's true.
  3. Fill in the project: Project name, Contract or award no., Funding agency, Funds obligated, CSI section and Submittal no.The agency and obligation date decide which rules apply.
  4. Fill in the product (Product description, the mill and Heat numbers, comma-separated), then the Manufacturer legal name and the signer's name and title.
  5. Choose the Category as delivered to the site and answer the place-of-manufacture questions honestly.For iron and steel: melted and poured in the U.S., and every later process including coating. For manufactured products: final manufacturing in the U.S. and the component costs.
  6. The preview shows Eligible to certify or Not eligible, with the reason. Export is available only once every check passes.
  7. Click Remove watermark & export. For your first clean export, enter your Work email, Company and Your role.Then Print / save PDF from the letter.
  • The company that made or supplied the product signs the letter: for fabricated steel, normally the fabricator. Don't sign one on a supplier's behalf or in a mill's name. Only certify what you can document.
  • In the app, export is included on Subcontractor Pro, GC & Engineer and project-pass projects. On Free it works like the free tool.
  • The letter isn't a determination of compliance. The awarding agency decides.
Still stuck? Email support@submittalforge.com with your organization name and what you were trying to do.