Skip to content
SubmittalForge

Free tools and references

Check a mill test report with the free validator

Upload one mill cert, or type its values in, and check it against its ASTM grade and the Buy America melt-and-pour rule.

  1. Open the mill test report validator. No account is needed.
  2. Drop the mill cert on the upload area, or click Choose file.One-page PDF, PNG, JPG or WebP, up to 4 MB. If a scan can't be read, click Enter the values by hand instead.
  3. It's read twice. Where the reads disagree, check the source and pick the right value.Your picks show as Confirmed.
  4. Check the values read and edit anything that was read wrong. The results update as you type.
  5. Read the results: the ASTM grade check covers chemistry, tensile, yield, the yield/tensile ratio, elongation and carbon equivalent, and U.S. melt & pour covers the Buy America rule.
  6. Under Next, click Draft the BABA letter from this cert to open the letter generator with its heat number, mill and melt-and-pour answer filled in, or Check another cert to start again.The values carried over are the ones you confirmed here.
  • To see how it works without a cert of your own, pick one of the samples under No cert to hand? Try a sample. Sample results are marked as sample data; click Clear sample to go back.
  • Free uploads: 3 files a day without an account, or 20 a month with a free account; after each upload the page says how many are left. Entering values by hand has no limit.
  • Print or save as PDF (under Next) prints the result and every check with the file name, heat, grade and date, to keep with the submittal. It isn't offered for the samples or while a value still needs confirming, and the printout says it's a pre-check, not a compliance determination.
  • Grades checked: ASTM A992, A36, A615 Grade 60, A53 Grade B, A500 Grade C and A312 TP316L.
  • For a multi-page packet with several heats and a bill of lading, use packet scanning in the app.
Still stuck? Email support@submittalforge.com with your organization name and what you were trying to do.