Skip to content
SubmittalForge

Submittals and documents

Add a submittal

Add a submittal to the register by hand, or by scanning its packet PDF.

  1. Open the project and click Add submittal.
  2. Enter the Submittal no. and Title. Add the CSI section (for example 05 12 00) and Subcontractor if you have them.Each number can be used once per project; for a resubmittal add a suffix such as -R1. If the project has a saved spec requirement for that CSI section, it's applied to the submittal automatically.
  3. Enter the Material cost (USD) and choose the Buy America category.Iron or steel product, Manufactured product, Construction material, or Cement / aggregates (not covered). The waiver ledger uses both. For Cement / aggregates the BABA letter and U.S. melt checks are skipped.
  4. Optional, on Pro, GC & Engineer or a project pass: under Packet PDF, choose the packet file.It's read before the submittal is created, and you confirm any uncertain values. Closing the dialog while it's reading stops the scan and adds nothing. See Scan a submittal packet.
  5. Click Add submittal. It appears in the register and opens on the right.

Next

A submittal without documents shows No documents. Drop its mill certs, bill of lading and BABA letter on it to have them read, or open Documents to enter them. See Attach documents to a submittal.

  • Submittals per project: Free 5, Subcontractor Pro and project pass 500, GC & Engineer 2,000.
  • You can also import submittals from Procore or ACC on the GC & Engineer plan.
Still stuck? Email support@submittalforge.com with your organization name and what you were trying to do.